Q379 double hook shot blasting machine shot blasting machine manufacturer specializing in aluminum and copper
主要适用于 多品种小批量的铸件、结构件的预处理，以去掉工件表面的铁锈、氧化皮等，从而提高产品的外观质量和表面的抗腐性能。 Q379 double hook shot blasting machine special shot blasting machine for aluminum and copper parts is mainly suitable for pretreatment of many kinds of small batch castings and structural parts to remove rust and oxide scale on the surface of the workpiece, thereby improving the appearance quality and product quality. Surface corrosion resistance.
、 Q379双吊钩式抛丸机铝件铜件专用抛丸机 设备主要特点 I. Main characteristics of Q379 double hook shot blasting machine
1. This machine adopts no pit structure, which is easy to install and reduces investment costs
2.Compact structure, high productivity, good cleaning quality, safe and reliable work, and stable operation
3.The hook has three functions: self-lifting, walking and indoor rotation.
4. Optimize the process state of the workpiece surface and increase the adhesion of the paint film when the workpiece is sprayed
5. Double hook structure, which can be cleaned and loaded at the same time, greatly improving work efficiency
6, with multiple throw heads, greatly improve the efficiency of cleaning.
7. High degree of automation, reducing labor intensity of cleaning work.
设备构成 Second, Q379 double hook type shot blasting machine shot blasting machine equipment for aluminum and copper parts
由清理室、大门、轨道、吊钩、提升机、检修平台、供丸系统、溜槽及涨紧装置、螺旋输送器、分离器、抛丸器、除尘器和电气系统等组成。 This machine is mainly composed of cleaning room, gate, track, hook, hoist, maintenance platform, shot supply system, chute and tensioning device, screw conveyor, separator, shot blaster, dust collector and electrical system.
主要参数 3. Main parameters of Q379 double hook shot blasting machine
1) Outside diameter of chamber body: 1.9 * 1.9 * 2.85m
2) Shot blasting machine:
Impeller diameter 250mm
Shot blasting capacity 250kg / min
Motor power 11KW
Number of shot blasters 2
3) Hoist: 30t / h
Belt speed 1.2m / s
Separator 30t / h
Separation zone wind speed 4-5m / s
5) Screw conveyor
Capacity 30t / h
6) The first loading of the projectile is about 1000-2000kg
7) Air volume
Total air volume 7500m3 / h
Cleaning room 5500m3 / h
Separator 2000m3 / h
Fan power 7.5KW
8) Hook (double)
Maximum load 1t
9) Total power: about 35kw
上的规格和技术参数只是我公司常规Q379双吊钩式抛丸机产品的参数。 Note: 1. The above specifications and technical parameters are only the parameters of our company's conventional Q379 double hook shot blasting machine products.
2. The company can also determine the technical parameters according to the specific requirements of customers, tailored to customers.
工件原理： Fourth, Q379 double hook shot blasting machine shot blasting machine workpiece principle of aluminum and copper parts :
When the shot blasting machine blasts various workpieces, the workpieces are hung on a special tooling, driven by an electric hoist, and run along the guide rail to the shot blasting room. The shot blasting machine door and shot blasting machine adopt interlocking device. When the door is not closed tightly, the shot blasting machine cannot start. When the door is closed, the shot blaster starts the workpiece, and the workpiece is rotated by the rotation motor, so that the workpiece can be completely cleaned. At this time, the loading operation can be performed on another hook to improve efficiency. When the shot blasting machine finishes cleaning, close the shot blasting machine and stop the rotation. Driven by the electric hoist, the lower part of the cleaning room is transported along the guide rail. At the same time, another hook enters the cleaning room for shot blasting. The cleaning process of the workpiece is completed.
V. Precautions during normal work and maintenance
In order to ensure the normal operation of the equipment and the personal safety of the operators, the following matters must be paid attention to when working on the equipment:
在设备运行时不允许打开或进入抛丸室维修门。 1. It is not allowed to open or enter the blast room maintenance door while the equipment is running. When working, the operator should stay away from the shot blaster.
检修现场设备与电气元件前,应关闭相应的电源开关(刀开关和自动空气开关)并通知总控制台操作员。 2. Before overhauling field equipment and electrical components, turn off the corresponding power switches (knife switches and automatic air switches) and notify the operator of the main console.
在低压配电屏前安放 “ 正在检修,严禁送电”的标牌。 3. Place a sign in front of the low-voltage power distribution screen that is " overhauling, and power transmission is strictly prohibited."
链条等的所有保护装置,只有在检修时方可拆卸,检修工作完毕后应重新安装好。 4. All protection devices such as chains can only be dismantled during maintenance, and they should be reinstalled after maintenance.
在抛丸清理区内,要每项班打扫，必须保证地板清洁,不得有丸粒存在,以免滑倒摔伤。 5. In the shot blast cleaning area, to clean each shift, the floor must be clean and no pellets are present to avoid slipping and falling.
售后服务保证措施 Six, after-sales service guarantee measures
“ 三包 ” ， “ 三包 ” 期一年； 1. " Three Guarantees " is implemented for product quality and the " Three Guarantees " period is one year
2. During the warranty period, repairs and replacements of electrical control and mechanical parts failures and damaged parts due to normal use (except man-made and wearing parts);
“24 小时 ” 答复，即用户与我公司售后服务办（电话： 0515-83752966 ）联系，保证在 24 小时内电话解决或派人走出。 3. The after-sales service implements a "24- hour " response, that is, the user contacts our company's after-sales service office (phone: 0515-83752966 ) to ensure that the phone is resolved within 24 hours or someone is sent out.
4. Responsible for providing technical information such as the detailed list of wearing parts of equipment and equipment, instruction manuals, certificate of conformity to the buyer.
，欢迎新老客户来公司考察面谈。 Reminder: The prices marked on the website are for reference only. The specific prices are finally determined according to the equipment configuration . Welcome new and old customers to visit the company for interviews.
Company phone: 0515-83752966
Mobile phone: 13505113250
小时客服热线： 400-690-2006 24- hour customer service hotline: 400-690-2006
： 2240629543 QQ : 2240629543
http://ywl66.com Corporate website: http://ywl66.com
www.ydpwj.com http: // www.ydpwj.com
Enterprise Wangpu: http://jsydzj.cn.1688.com/
Business address: No. 43 Dalong Xiaojie, Xituan Town, Dafeng City, Jiangsu Province
http://jsydzj.blog.1688.com/ Enterprise Blog: http://jsydzj.blog.1688.com/
Q379双吊钩式抛丸机铝件铜件专用抛丸机厂家专业定制 详细产品信息，如有疑问或购买意向请与我公司联系， 我们将竭诚为您服务！ The above is the detailed customized product information of Q379 double hook type shot blasting machine for aluminum and copper parts . If you have any questions or purchase intention, please contact our company, we will serve you wholeheartedly!