??百乐宫网上游戏??

Welcome to the official website of Jiangsu Yingda Machinery Co., Ltd.!

Chinese | English

National Service Consulting Hotline
company's product

contact us

Jiangsu Yingda Machinery Co., Ltd. <br /> Mobile: 135-0511-3250
Phone: 0515-83752966
Fax: 0515-83756006
Address: No. 43 Dalong New Street, Xituan Town, Dafeng, Yancheng City, Jiangsu Province

Or leave us a message
Leave message

您的位置: 首页 >> 产品展示 > ProductsYour position: ??百乐宫网上游戏?? >> Products >

Q3210 Shot blasting machine crawler type automatic cutting shot blasting machine
Detailed description:

Q3210 shot blasting machine crawler type automatic blanking shot blasting machine

的用途:适用于小型铸件、锻件、冲压件、齿轮、弹簧等零件及热处理车间清理薄壁、怕碰撞零件表面粘砂,氧化皮等附着物,有时也可以用于一些零件表面强化处理。 I. Use of Q3210 crawler shot blasting machine : suitable for small castings, forgings, stampings, gears, springs and other parts and heat treatment workshops to clean thin-walled, collision-resistant parts, such as sand, oxide scale, and other attachments. Strengthen the surface of some parts.

具有以下特点: Second, Q3210 crawler shot blasting machine has the following characteristics:

1. This machine adopts the direct-coupled shot blasting machine of the motor, which has the characteristics of long service life and simple structure.

2. It adopts BE-type full-screen air-selected shot-sand separator, which has good separation effect and high productivity, and has a positive effect on improving the service life of the blade.

3. Using a bag filter, the dust emission concentration is lower than the national standard, which improves the working environment of workers.

4. The use of wear-resistant rubber tracks reduces the collision damage of the workpiece and reduces the noise of the machine.

5, high degree of mechanization, improve work efficiency.

6, using high-quality electrical components, long life.

  Note: 1. This machine cannot clean high-temperature parts and burrs with burrs, otherwise the tracks will be damaged.

2. Special tracks can be used for small workpieces.

3. During shot blasting, the workpiece is reversed when the crawler is in forward rotation, and automatic discharge is realized when the crawler is in reverse.

4. There are two types of control: automatic and manual.

   Users can choose a suitable model according to the needs of the workpiece.

技术参数 Technical parameters of Q3210 shot blasting machine

  1.Diameter of track end plate Ф1000mm

2.Large single piece weight for cleaning workpiece 30kg

Maximum load of drum (easy to roll) 700kg

3.Lifting motor 2.2kw

Lifting capacity 20t / h

4, shot blasting machine Q034

Quantity 1

Shot blasting 220kg / min

Shot blasting power 11KW

5.Air volume of dust collector 5700m3 / h

6.Fan power 5.5kw

7.Total installed capacity ≈ 22kw

  Note: The productivity is related to the shape of the workpiece. Generally, the surface area of the workpiece is 0.24 square meters per minute.


工作原理及结构性能概述 Fourth, Q3210 crawler shot blasting machine working principle and structural performance overview

This machine is mainly composed of cleaning room, gate mechanism, shot blaster, screw conveyor, separation system, dust removal system, electronic control system and other parts.

  working principle:

After adding a specified number of workpieces in the cleaning room, the machine starts, the workpieces are driven by the drum and start to reverse. At the same time, a shot blaster with a large shot volume and a high shot speed can significantly improve the cleaning efficiency and obtain satisfactory cleaning quality. The structure of the shot blasting chamber is computer-aided, which makes the arrangement of the shot blasting machine more reasonable.

The projectiles thrown out by the shot blaster form a fan-shaped beam, which evenly strikes the surface of the workpiece to achieve the purpose of cleaning. It is sent into the lifter, where the lifter lifts up into the separator for separation. The dust is sucked into the dust collector by the fan for filtering, and the clean air is discharged into the atmosphere. In the dust box, the user can clear it regularly. The waste sand flows out of the waste port. After the separator is separated, the clean projectile enters the shot blasting device through the electromagnetic supply valve and throws the workpiece.

Five, matters needing attention:

1. The dust in the dust collection box below the dust collector should be removed regularly to prevent blocking the dust removal tube and affecting the dust removal effect.

2. The debris at the bottom of the cleaning room and under the screen in the separator funnel should be cleaned frequently.

3. The projectiles around the equipment should be cleaned frequently to prevent injury from slipping.

4. The crawler and elevator belts in the cleaning room should be checked frequently for deviations, so as not to damage the belts.

5. It is forbidden to open the feeding door when the shot blaster is not completely stopped to prevent accidents.

Sixth, quality assurance:

1. Reasonable and thoughtful design, fully considering the various functional needs of customers.

2. Material required for the product: Steel plates and profiles are all purchased from brand-name manufacturers.

3. The supporting standard parts should be purchased from famous brand manufacturers as much as possible, such as bearings, motors, reducers, etc.

4. Load test of key components shot blasting plant, dry running test of various motion institutions.

5. Design and quality inspection personnel set up a special quality supervision team to supervise the implementation of the above steps to ensure product quality.






机械友情提醒 Friendly reminder from Jiangsu Yingda Machinery :

The information on the network can be used as a platform for you to understand the relevant knowledge of the equipment and find manufacturers. You need to choose the real manufacturer when purchasing equipment. If you encounter technical problems, quality problems, and purchase related accessories during the use of the equipment, you can find us in time. 英达 品牌传播给更多的客户,因此您是我们设备的使用者,更是传播者。 There is no one-shot deal to buy our products. We also hope to spread the " Yingda " brand to more customers through your use . Therefore, you are the user and the communicator of our equipment.

价格 ,仅供参考, 不作交易价格 , 具体以实物为准 , 欢迎来电咨询】 [ Price is for reference only, no transaction price , the actual product shall prevail , please contact us for consultation]

 

company profiles

Jiangsu Yingda Machinery Co., Ltd. (formerly Dafeng Foundry Machinery General Factory) was established in 1976. It is a high-tech enterprise integrating R & D, design, manufacturing, sales and installation services. Jiangsu Yingda has been engaged in the research and development and production of surface treatment equipment for nearly 40 years. It mainly produces seven series of products in the mechanical industry such as metal surface cleaning machinery and equipment, and sand processing modeling equipment. Products are widely used in railways, automobiles, ships, construction machinery, metallurgy, military industry, medicine and other fields.

The company took the lead in passing ISO9001: 2008 quality management system certification and ISO14001: 2004 environmental management system certification. With a professional technical team, it has successively obtained 30 product patents such as mesh belt pass type shot blasting machine, new mechanical recycling blasting room, roller pass type heavy steel shot blasting machine and 10 Jiangsu high-tech products. (Note: For details of each product patent and all certificates, please refer to the company's official website: http://ywl66.com/ or Ali integrity file)

The company adheres to the tenet of "innovation and intent to build", adheres to the principle of "honesty and responsibility", is committed to using technology to provide customers with a better experience and service, and grows with customers to achieve a win-win situation. The product structure and business scope are diversified, serialized and grouped. The products are exported to all parts of the country, and some are exported to Southeast Asia, West Asia and other places.

抛丸清理机 设备,也可根据客户的需求 量身定制。 The company can provide customers with a complete set of shot blasting cleaning equipment, and can also be customized according to customer needs .

或来我司考察洽谈 Welcome friends from various circles to call or come to our company for inspection and negotiation !

Company phone: 0515-83752966

Mobile phone: 13505113250
24-hour customer service hotline: 400-690-2006

:2240629543 QQ : 2240629543

Corporate website: http://ywl66.com

http: // www.ydpwj.com

Enterprise Wangpu: http://www.jsydjx.cn

Business Address: No. 43 Dalong Street, Xituan Town, Dafeng, Yancheng City, Jiangsu Province



七乐彩 必赢真人娱乐 欢乐拼三张 欢乐拼三张