QXY-3000 automatic 3m steel plate pretreatment line
Introduction of steel plate pretreatment line:
The steel plate pretreatment line is also called the steel pretreatment line, which refers to the process of blasting and rusting the surface of the steel before processing (that is, the state of the raw materials) and applying a layer of protective primer. The pretreatment of steel can improve the corrosion resistance of mechanical products and metal components, improve the fatigue resistance of steel plates, and extend its service life. At the same time, it can also optimize the state of the steel surface manufacturing process, which is conducive to CNC cutting and blanking. In addition, because the shape of steel before processing is relatively regular, which is conducive to mechanical rust removal and automatic painting, the use of steel pretreatment can greatly improve the efficiency of cleaning work, reduce the labor intensity of cleaning work and environmental pollution.
钢板预处理生产线。 At present, the widest width of the steel plate pretreatment line produced by our company is generally divided into: 1m, 2m, 3m, 4m, and 5m steel pretreatment production lines. Common section steels such as angle steel, channel steel, I-beam, etc. can be processed by the steel plate pretreatment line. At present, the steel plate pretreatment line has been widely used in shipbuilding, automobile, elevator, chemical, locomotive and other industries.
The main components of the QXY steel plate pretreatment line are composed of a cleaning room, a roller conveyor, a shot blaster, a projectile circulation system (including a hoist, a separator, a longitudinal screw conveyor, and a shot pipe), dust removal, cleaning, and electrical control. .
The steel plate pretreatment line produced by our company has the following characteristics:
1. The whole set of processing line equipment comprehensively absorbs the advanced Swiss GF.DISA and American Pangborn design technology, and improves and innovates on the original basis to maximize the energy saving, high efficiency, and environmental protection characteristics in use.
2. The whole machine adopts PLC automatic control, which has a high degree of automation, and can be equipped with an automatic coder and an automatic barcode printing device according to user requirements.
3. The painting reciprocating mechanism uses a dedicated reciprocating slide module, which is driven by imported servo motors of the steel plate pretreatment line, with high accuracy and low noise.
4. The central control room is used for centralized control. The roller table and paint spraying machine are operated by variable frequency stepless speed regulation.
Our company is committed to using technology to provide customers with a better experience and service. We hope to continue to improve according to customer requirements, grow together with customers, and achieve a win-win situation.
The following is a 3-meter steel plate pretreatment line sent by our company to a heavy machinery group in Henan (on-site installation photo)
http://ywl66.com ） (For more cases, please refer to the official website: http://ywl66.com )
Parameters of steel plate pretreatment line: Note: 1. The specifications and technical parameters in the above table are only the parameters of our company's conventional products.
The following are the technical parameters of various models. Please choose different models according to the characteristics of the workpiece. If there is no model suitable for your workpiece, our company will design a suitable non-standard model according to the customer's needs, which will be more conducive to the improvement of production efficiency and reduce resource waste and cost.
2. The company can also determine the technical parameters according to the specific requirements of customers, tailored to customers.
1. Reasonable and thoughtful design, fully considering the various functional needs of customers.
2. Material required for the product: Steel plates and profiles are all purchased from brand-name manufacturers.
3. The supporting standard parts should be purchased from famous brand manufacturers as much as possible, such as bearings, motors, reducers, etc.
4. Load test of key components shot blasting plant, dry running test of various motion institutions.
5. Design and quality inspection personnel set up a special quality supervision team to supervise the implementation of the above steps to ensure product quality.
Service guarantee measures before sale:
1. Detailed answers to related technical inquiries from customers.
2. Configure device models and solutions for users based on their needs.
3. Send company technicians to the user's site for free to plan the site for the user and design the installation flowchart for the user's reference.
4. Provide technical information such as equipment list, equipment process layout, civil engineering foundation drawings, and equipment installation drawings.
1. The company's technical staff will guide the foundation construction at the user's site.
2. The company arranges the equipment required for production strictly in accordance with the contents of the contract.
3. Strict inspection, test machine, organization shipment and user acceptance before the product leaves the factory.
1. The company assigns special after-sales service personnel to guide customers to install and debug on site
2. On-site training operators
3. After the complete set of equipment is installed, leave 1 or 2 full-time technical staff to assist customers for 24 to 48 hours of production free of charge until the customer is satisfied.
★ 1. Quick response: promise to give you detailed quotation instructions and product information in the fastest time; promise to tailor the product you require in the shortest time ★ 2. High-quality products and prices: Our company purchases through manufacturers The measures such as the large-scale purchase of various raw materials have reduced the company's cost, ensured that the product was of high quality and low price, and effectively discounted the advantages obtained by our company's scale effect directly to customers. Products are sold with partial paid services. Large-volume or long-term cooperation customers can become our VIP customers and enjoy more affordable prices and VIP-like services.
Friendly reminder from Jiangsu Yingda Machinery:
The information on the network can be used as a platform for you to understand the relevant knowledge of the equipment and find manufacturers. You need to choose the real manufacturer when purchasing equipment. If you encounter technical problems, quality problems, and purchase related accessories during the use of the equipment, you can find us in time. There is no one-shot deal to buy our products. We also hope to spread the "Yingda" brand to more customers through your use. Therefore, you are the user and the communicator of our equipment.
Jiangsu Yingda Machinery Co., Ltd. (formerly Dafeng Foundry Machinery General Factory) was established in 1976. It is a high-tech enterprise integrating R & D, design, manufacturing, sales and installation services. Jiangsu Yingda has been engaged in the research and development and production of surface treatment equipment for nearly 40 years. It mainly produces seven series of products in the mechanical industry such as metal surface cleaning machinery and equipment, and sand processing modeling equipment. Products are widely used in railways, automobiles, ships, construction machinery, metallurgy, military industry, medicine and other fields.
The company took the lead in passing ISO9001: 2008 quality management system certification and ISO14001: 2004 environmental management system certification. With a professional technical team, it has successively obtained 30 product patents such as mesh belt pass type shot blasting machine, new mechanical recycling blasting room, roller pass type heavy steel shot blasting machine and 10 Jiangsu high-tech products. (Note: For details of all product patents and all certificates, please refer to the official website of the enterprise: http://ywl66.com/ or Ali Chengxin Archives)
The company adheres to the tenet of "innovation and intent to build", adheres to the principle of "honesty and responsibility", is committed to using technology to provide customers with a better experience and service, and grows with customers to achieve win-win. The product structure and business scope are diversified, serialized and grouped. The products are exported to all parts of the country, and some are exported to Southeast Asia, West Asia and other places.
Jiangsu Yingda Machinery Co., Ltd.
Contact: Mr. Chen
24-hour customer service hotline: 400-690-2006
Corporate website: http://ywl66.com
Enterprise Wangpu: http://jsydzj.cn.1688.com/
Company address: No. 43 Dalong Xiaojie, Xituan Town, Dafeng, Yancheng City, Jiangsu Province. Welcome friends from all walks of life to call us or come to our company for inspection and negotiation!